Detail types of the blinds SLOPE line

• types: 1A - 1B
  

  - Only tilting
  - Min. breadth 30cm
  - Control on the lower side
  
  Important measurments

  
  
  
  
• types: 2A - 2B
  

  - Raising of the slats only in standard part
  - Minimum breadth 30cm, max. height 250cm
  - Control on the lower side
  
  Important measurments

  
  
  
  
• type: 3A
  

  - Raising of the slats is possible in the total height
  - Min. breadth of the head rail 25cm
  - Difference between the head and bottom rail = max 30cm
  
  Important measurments

  
  
  
  
• type: 3B
  

  - Raising of the slats is possible in the total height
  - Min. breadth of the head rail 25cm
  - Difference between the head and bottom rail = max 30cm
  
  Important measurments

  
  
  
  
• types: 4A - 4B
  

  - Only tilting
  - Min. breadth 30cm
  - Min. length of the head rail in horizontal part 5cm (in this case is the control on the lower side)
  
  Important measurments

  
  
  
  
• types: 5A - 5B
  

  - Raising of the slats only in standard part
  - Min. breadth of the bottom rail 30cm
  - Min. length of the head rail in horizontal part 5cm (in this case is the control on the lower side)
  
  Important measurments

  
  
  
  
• type: 6
  

  - Only tilting
  - Min. breadth 30cm
  - Vrcholový úhel max 65°
  
  Important measurments

  
  
  
  
• type: 7
  

  - Raising of the slats only in standard part
  - Min. breadth 30cm
  - Vrcholový úhel max 65°
  
  Important measurments

  
  
  
  
• type: 8
  

  - Only tilting
  - Min. breadth 30cm
  - Min. breadth of the head rail 10cm
  
  Important measurments

  
  
  
  
• type: 9
  

  - Raising of the slats only in standard part
  - Min. breadth 30cm
  - Min. breadth of the head rail 10cm
  
  Important measurments

  
  
  
  
• Remarks for measurement
  

  •  Meter only the measures that are by the individual types mentioned. The other measures will be calculated in our firm by special software.
  •  By sloping windows will be assumed these are in the normal corners really 90°. If you are not sure, measure the window also diagonal.
  •  Don´t forget the limits by some types.